Thermostat rev. 245 (by Tommy)
Simple thermostat that expects a relay that will close setting high to pin33
And on pin12 a DS18B20 onewire tempsensor

It will also check for a BME280 temp/humidity/pressure sensor on the i2c bus.

If it cannot detect a temp sensor it will fall back to using the interal temp sensor, Since it is on the CPU it will be more likely be the CPU temp and not the room temp.
Category: uncategorised
Status: working
Dependencies
  • No dependencies found
Dependants
  • No dependants found
File Last edited Size in bytes
__init__.py 2018-01-05 13:33:21 23829
bootstrap.html 2018-01-05 13:33:21 2345
bme280.py 2018-01-05 13:33:21 8526